LPHX 60527 có áp suất làm việc từ 120 mbar đến 1013 mbar, lưu lượng hút đạt được từ 255 m3/h đến 800 m3/h
LPHX 60527 là dòng bơm cung cấp riêng lẻ với động cơ nên có thể đặt hàng thân bơm riêng (bare shaft pump) và tự lắp ráp động cơ (motor) theo yêu cầu riêng
hoặc ráp láp trọn bộ (complete pump) từ hãng
hoặc từ đại lý ủy quyền SIHI ở Việt Nam để có báo giá phù hợp hơn.
CONSTRUCTION
Sterling SIHI liquid ring vacuum pumps have a simple but robust
construction with the following features and benefits:
Near isothermal compression
Oil free, with no internal lubricationCapable of handling almost all gases and vapoursAble to handle quantities of liquid “carry over”Low maintenance and safe operationLow noise and almost vibration freeAvailable in a wide range of materialsBroad range of applicationsO-ring sealing as standardCavitation protection as standardDrain hole as standardBuilt-in solids drainRotating metallic parts are non contacting to minimise wearATEX compliance
Sterling SIHI liquid ring vacuum pumps of the range LPH 60527 are
one stage pumps. They can be used as compressors up to a
pressure of 1.5 bar without any modification (see the Technical
Catalogue - Liquid Ring Compressors Part K).
APPLICATIONS
Evacuation and pumping of dry gases and saturated vapours. The
pumps can also handle liquids. These units offer pressures in the
range of 120…900 mbar(a) to atmospheric. Typical application
areas include:
Chemical and pharmaceutical industry for distillation, drying and
degassing.
Electronic industry for impregnation and drying.
Plastics & Rubber industry for degassing.
NOTE
By continuously feeding the pump with a small amount of service
liquid (usually water), the heat due to gas/vapour compression is
conducted away. This also replenishes the liquid ring and ensures
that it does not become saturated with process media. The
condensed gas and fluid can be separated in a liquid separator (see
Accessories Catalogue). Recharging the pump with service liquid at
ambient temperature enables the unit to condense evacuated
gases/vapours. It can therefore be used for solvent recovery. More
information is provided in the accessory catalogues. The integrated
solids drain permits the removal of any entrained solids whilst the
pump is operating. The service liquid can, therefore, simply be recirculated.
The rotation of the pump is clockwise when viewed from
the drive end.
Cut-away diagram LPH 60527 with single, double mechanical seal and gland packing
Example of an Order:
LPHX 60527 AB AGE 0B 1 with 18.5 kW AC motor, 50 Hz, 400V , IP55
Link download catalogue để tham khảo thêm: Catalogue LPH 60527